This isn't the first time we've had issues with Glocks, when I first started working here we had the older Gen 3 Glock 22 that we had to get rid of because the firing pins were falling out of the guns. Granted these guns were older and had a decent number of rounds through them before they started falling apart, but it's still not what you expect from a brand that markets it's guns as having "unsurpassed reliability." When we were going to replace those guns our Department considered the then new Gen 4 Glocks. But during testing they noticed several of the guns had jamming and lock back issues which Glock at first denied, but later admitted to and instructed our armorers to use a dremel tool to modify the guns to make them work, voiding the warranty in the process. Due to that issue, our Department instead went with the Smith & Wesson M&P 45, which we carrier for several years.
The Smiths ended up having defective magazine springs shortly after we got them, but unlike Glock, Smith admitted to the problem and replaced the defective magazine springs free of charge like you'd expect from any reputable company. So when we switched back to Glock a few years ago I was personally surprised that we were doing business again with a company that we had several quality issues with in the past.
We did some testing with my gun, which was one of the defective ones a few months ago. My gun was shot from a fixed position on a bench from about 5 to 7 yards. This gun only had about 300-400 rounds through it at the time as I'd never shot it outside of a Department sponsored training session. You can see on the photo below the top red dot was the target we were shooting at and the entire grouping is 1 to 2 inches to the left. This isn't a huge deviation, but this is also a relatively close range, as you get farther away the shot will be farther and farther off target. I've also been informed that members who have put a lot more rounds through their guns are seeing much larger deviations since the problem seems to get worse with use.
The lower red dot in the photo is a brand new gun right out of the box shot in the exact same way by the same person. As you can see that gun is dead on target, the shooter even managed to put multiple rounds through the same hole. This pretty much blows their excuse of our Officers holding the guns wrong right out of the water.
This problem isn't limited to us or just to Police, if you do a Google search you'll find a plethora of posts on gun forums from private owners complaining of the same issue with these guns.
As I stated earlier, we've known about this issue for a few months but we've kept quiet on it because I wanted to give Glock and our Administration time to remedy the problem. But it seems at this point that there is no remedy coming, Glock has no interest in making it right and our Administration has no interested in forcing their hand or replacing the guns. As of right now these guns are still on the street being carried by our Officers. If one of our members were to be involved in a shooting tonight where something or someone gets hit that wasn't supposed to and the Department was aware that the guns weren't shooting straight and did nothing about it, who's going to take the fall? My members have guns with sights cocked to the side and are being told to aim to the right of what they want to hit, this is completely unsafe and unacceptable and should've never been allowed to happen.
Chief Sansom and DC Hawkins have been aware of this issue for months and could have used their leverage as a members of the State and National Chiefs of Police Associations to pressure Glock into making the situation right. Or brought the issue before Town Council to get funding to replace the guns with something else that works. Instead they've done nothing and left the defective guns in our holsters. Our Officers deserve to have a weapon that's reliable and works properly, we've been failed in this case by both the manufacturer and our own Administration.
In Policing, most of us will never have to fire our weapons outside of training throughout our entire careers. But when we do it's because we're in a high stress situation and lives are on the line. Shooting in these circumstances is instinctual, it needs to be point and shoot, we can't be worrying about trying to aim to the right or any other bullshit "fixes" to compensate for defective equipment.
I'm not personally a big "gun guy," I'm not a fan of one brand over another, so I don't care what we change to. But I'm calling on our Chief to dump Glock and their defective guns and find us something else that's reliable, easy to use, and most importantly, hits what we're aiming at. Also consider whether or not it's backed up by a company who stands behind their products and takes responsibility for it's errors. It isn't just our safety on the line here, but also that of the citizens we're sworn to protect. Let's avoid a needless tragedy and get this problem fixed NOW.
